288W Greenception LED GROW GC-9 set 2pcs
The GC clusters have been developed to serve as a direct alternative to currently available sodium vapour lamps.
They deliver exactly the same crop yield whilst saving up to 40 per cent in energy. Both the amount of light and the colour of the light can be adjusted to suit a particular phase of the cultivation process. Efficiency has been increased considerably in our new LED cluster series.
We only install the highest quality components: A highly efficient full spectrum PAR LED COB chip is the key component of the lamps. This is supplemented by OSRAM and CREE LED chips.
Greenception GC 9 Cluster-LEDs. Always the best available technology
Greenception Cluster LED lamps are optimized for the application for the plant cultivation. Thanks to the square build, square surfaces are optimally illuminated and scattering losses are reduced. To be able to work without additional light in the plant cultivation, the Greenception LEDs are equipped with up to 8 different light colors.
In detail those are the following:
380nm (UV-A, minimal amount to control the hormone balancen - UV-A does NOT have an effect on the photosynthesis)
455nm (blue, important for the influence on the growth form - more blue produces dense plants)
630nm (red, important for the photosynthesis - more red results in more biomass)
660nm (dark-red, important for the photosynthesis and flower development - dark-red increases the biomass and accelerates the flower development)
720nm (Ultra-red, important for the flower development - speeds up the spreading of the blossom)
760nm (Infrared, minimal amount to control the hormone balance - does NOT have a direct effect on the photosynthesis)
6400k (cold-white to cover the basic load during the growth)
2100k (warm-white to cover the basic load during the blossom)
The particularity of the Greenception LED bulbs is, that the mixing proportion is not fixed and can be modified by switching on or off the individual module-groups. Plant often need a different light mix during the growth phase than during the blooming phase (e.g. to achieve a denser growth). For this reason, 8 light colors have been merged in 3 different mixtures to modules. The center piece of each module is a high-efficient full-spectrum COB-chip. This features a color temperature of 3000k, which consists of several single chips and suits for all plants in all phases.
The COB-chip has been developed for a maximum PAR per watt (photosynthesis active radiation). Completed is the COB by SMD-chips by Osram (red, dark-red, infrared) and CREE (blue and white). These additional chips convey the spectrum of the COB chips towards blue for dense, strong growth, or towards red for big, lush blossoms and fruits. They can be adjusted individually.
The module groups can be switched individual as follows:
Module I: growth 1x 32 watt
Module II: full spectrum: 4x32 watt (128w)
Module III: Bloom: 4x 32 watt (128w)
Module I is optimized for the growth phase. A relatively high amount of blue and white support a dense growth.
Module II suits for the growth as well as blooming phase. Optimal plant light full spectrum.
Module III is optimized for the bloom. A high portion of red and an additional infrared push.
In comparison to many other LED lamps on the market, Greenception uses only chips from well-known manufacturers of the highest quality like Osram or Cree. This quality difference is clearly remarkable for the plants.
We recommend the GS 9 for a ground floor of max. 100x100cm
Reasons for Greenception-LED vs. Sodium-vapor lamps:
- 40% less energy consumption for the same yields
- less heat
- no danger of burning or explosion
- healthier plants due to less stress
- more dense and stronger plants due to better light spectrum
- less follow-up costs due to longer durability
- environmental friendly
- Illuminated area: recommendation up to max. 1m²
- Amount of cluster: 9
- Number of levels: 3
- Dimensions: 40,5 x 40,5 x 7,5 cm
- Power consumption: max. 288 watt (incl. fan)
- Power consumption in detail:
Full spectrum: 128 watt
Growth spectrum: 32 watt
Bloom spectrum: 128 watt
- Photon flow density PAR PPDF approx. 1.800 µmol/m² sec. (30 cm)
- Photon flow density PAR PPDF approx. 2.450 µmol/m² sec. (15 cm)
- Corresponds to a 400 watt sodium-vapor lamp
- Light flow preservation: 80% after service lifetime
- Operation temperature: min. -30° to max. 45°
- Input voltage: AC85-264V
- Voltage: 220 - 240V ~50/60Hz
- Starting time, ignition time: - Angle of radiation: 90°
- Operation time: 40.000 hours
- Cycles of operation: > 50.000
- Material: coated metal plate top, aluminum housing and hard plastic corners
- Weight: approx. 5,88 kg
Scope of supply:
1 x LED unit
1 x cable
1 x Instructions
1 x mounting (steel wire & snap hook)